Huth 2806

Model 2806 is designed for high volume shops that need quick, precise, bending and end finishing.

The 2806 offers the convenience of a knee pedal control along with manual and automatic push buttons. A reduced size control panel allows the operator to get closer to the work area for more precision and less fatigue.

The Smart Automatic Mode features an adjustable return-to–home position control. This unique, timesaving feature increases efficiency by assuring fast and easy transitions between multiple bends. In the automatic mode, the automatic depth-of-bend selector ensures precise bending control through the use of an easy-to-read, easy-to-adjust depth of bend plate.

Model 2806 comes with a 5 horse power motor and provides 58,000 lbs of bending force. An optional 7 ½ horse power motor is available for 25% faster bending.

The heavy duty swager/expander gives you complete end finishing capabilities. The swager end accommodates 1” to 3” tubing. The expander end allows for expansions from 1” to 5 ½”. With Huth’s Accu-Sizer bull’s-eye expanding system, you can dial in precise expansions every time.

Features

• Easy-to–use manual knee pedal control
• Push button control
• Automatic Depth-Of-Bend selector
• Auxiliary on/off switch
• 58,000 lbs of bending force - more than enough for 3" tubing
• Agricultural Main Cylinder
• Flat tool tray
• Bending die retainer
• Heavy duty Swager/Expander
• Rugged I-Beam construction
• Exclusive safety guard package
• Front swivel casters w/o brakes
• 220 volt, 60HZ operation
  * Single phase req. 30 amp service
  * Three phase req. 20 amp service
• High voltage and high speed options available.

The Huth 2806 die package includes:

5530 5" Radius Die 3"
5412 5" Radius Die 2-1/2"
5414 5" Radius Die 2-1/4"
5200 5" Radius Die 2"
4414 4" Radius Die 2-1/4"
4200 4" Radius Die 2"
3134 3" Radius Die 1-3/4"
3112 3" Radius Die 1-1/2"
1350 Full Back Shoes 3" (2)
4412 Full Back Shoes 2-1/2" (2)
4211 Full Back Shoes 2-1/4" (2)
1200 Full Back Shoes 2" (2)
1134 Full Back Shoes 1-3/4" (2)
1112 Full Back Shoes 1-1/2" (2)
4410 Half Shoe 2-1/2"
4416 Half Shoe 2-1/4"
1045 Half Shoe 2"
1040 Half Shoe 1-3/4"
1038 Half Shoe 1-1/2"
1750 Collet 2-1/2"
1725 Collet 2-1/4"
1720 Collet 2"
1734 Collet 1-3/4"
1712 Collet 1-1/2"
853 Flare Tool
557 Domer Die 1-3/4" - 2-1/2"
558 Domer Die 2-5/8" - 2-3/4"
555 Female Ball Die 1-3/4" - 2"
556 Female Ball Die 2-1/4" - 2-1/2"
550 Male Ball Die 1-3/4" : Swage 2"
552 Male Ball Die 2" : Swage 2-1/4"
553 Male Ball Die 2-1/4" : Swage 2-1/2"
554 Male Ball Die 2-1/2" : Swage 2-3/4"
112 Swage Die 1-1/2"
134 Swage Die 1-3/4"
508 Arbor
498 Arbor Tip
499 Arbor Tip
473 Segment 1-3/8" - 1-3/4"
475 Segment 2-1/8" - 2-1/2"
476 Segment 2-1/2" - 3"
97050 Die Spring
870 O-Ring Kit
815 Die Holder (853)
816 Die Holding Pin
855 Die Pins (Qty. 30)
1079 Full Shoe Spacers (2)
1080 Half Shoe Spacer
97302 Huth Instructional Video

There are no PDFs for this product.

There are no videos for this product.